Lian Li Secondary Power Supply Starter Overview and Function
As we see here, Lian Li is operating under a very loose definition of the word “kit” as the Lian Li Secondary Power Supply Starter Kit only contains a dual power supply adapter cable that came in a clear plastic bag. There is literally nothing else in the “kit.” On the upside, the actual construction is very good and the pins are better seated than what I often see in 24 pin ATX connectors from major power supply OEMs so Lian Li at least does a go Nike Outlet od job of putting the cable together. In addition to combining two PSU to be started by a single switch, the adapter offers 4 1/2″ of extension to your primary 24 pin ATX connector. power supply being added) along with a wire to connect the two PS_On pin to turn on both power supplies at once. Once the two units are connected, users can then connect the Secondary Power Supply Starter Kit to their motherboard before powering on their system. As stated above, you do gain some extra reach with this method, but unlike the Ad Nike Outlet d2Psu, you can mount this adapter out of the way nearly as well so your wire management will likely suffer using this product.
As we see in the video above, after connecting the Secondary Power Supply Starter Kit it successfully turns on both power supplies at once allowing users to expand the number of PCI Express, SATA, and Molex connectors in their system to support things not possible with the original power supply because of either physica Nike Outlet Nike Outlet l or electrical restraints. Unlike with the Add2Psu method, the Secondary Power Supply Starter Kit does not use up a Molex connector so you retain full use of all of your peripheral connectors which is a bit of a bonus. Though if you are using every Molex connector on two power supplies maybe you need three power supplies which can be done as well.